Tuesday, 25 April 2017

Basic Operation using DSP Processor

 We used the hardware kit for the first time. The kit used was TMS320F28375. Instructions for arithmetic, Logical and Shift operations were performed. The changes in the register values before and after execution were observed and noted. Also a program was voice modulation was demonstrated.
Posted by at

8 comments:

  1. Keshvi Srivastava25 April 2017 at 22:26

    This comment has been removed by the author.

    ReplyDelete
  2. Unknown25 April 2017 at 22:27

    We studied basic arithmetic and logical functions that can be performed.

    ReplyDelete
  3. Unknown25 April 2017 at 22:34

    What arithematic operations can be performed using DSP board

    ReplyDelete
    Replies
    1. Unknown28 April 2017 at 10:01

      Arithmetic, Logical and shift operations were implemented by us.

      Delete
  4. Unknown25 April 2017 at 22:53

    DSPs are much faster for floating point operations. In microcontrollers, this has to be done in software.

    ReplyDelete
  5. AbhishekGaikwad25 April 2017 at 22:56

    Dsp have bit reversal unit in built

    ReplyDelete
  6. Keshvi Srivastava25 April 2017 at 23:11

    What all instructions were used?

    ReplyDelete
    Replies
    1. Unknown28 April 2017 at 10:02

      Arithmetic instructions like add, shift left and right and also logical operations like AND nad NOT were performed.

      Delete

Subscribe to: Post Comments (Atom)